Part Number: UCC2897A slua535a__Understanding and Designing an Active Clamp Current Mode Controlled Converter Using the UCC2897A.pdf 关于此输出电容的计算按照文章里面所讲,Lo=2uh,Imax为最大负载的一半=15A,Imin为空载电流=0A,Vos max=1.03*3.3=3.399V,Vos min=0.97*3.3=3.201V,算出来的Co=344uh,与您给出的671uh有较大的出入…
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 hier 是我的整个 main.c 文件、我在其中添加了之前指定的修改
/**
* @file main.c
*
* @brief
* This is the main file which implements the millimeter wave Demo
*
* \par
* NOTE:
* (C) Copyright…
Other Parts Discussed in Thread: INA219 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/617605/ina219-can-i-measure-less-than-1ma-precisely-with-ina219-if-so-how 部件号:…
根据NDK Started Guide 在lab6中要添加下面两个.c文件,并在下面的路径下。
sender.c and addToClient_starter.c (both located in the \starter directory).
但是我搜索了整个电脑都没有找到两个.c文件。(之前的lab3/lab5都跑通了)
有哪个大神知道的告诉我一声,谢了!