When I was running the DCC tuning tools, I selected VPAC3 and ran the single-camera app of j722s-evm-10_00_00_05. However, the DCC tuning tools stopped running when I was collecting raw images.
Part Number: AM62A7 HI experts，
The version of the SDK used is ：10.1.8--v10.01.08
Linux version 6.6.58-ti (aarch64-oe-linux-gcc (GCC) 13.3.0
When I use the above version, I get the following error when executing the edgeai-tiovx-apps-test program:
Here…
Hi
在readme的指导上明确说明
Note: This application supports both SPI and I2C mode of operation. Refer to mmwaveconfig.txt on choosing the mode of operation. How to run: 1. Connect AWR2243 ES 1.0/ES 1.1 boosterpack and DCA1000 EVM to PC. 2. Erase sFlash before…
# This uEnv.txt file can contain additional environment settings that you
# want to set in U-Boot at boot time. This can be simple variables such
# as the serverip or custom variables. The format of this file is:
# variable=value
# NOTE: This…
Part Number: TDA4AL-Q1 Dear TI
How to add a partiton with ext4 file system ?
Now it only has mmcblk0p1 "rootfs" We want to add mmcblk0p2 with ext4 file system
[u-boot] ==================================================
=> mmc info Device: mmc…
Part Number: MMWAVE-STUDIO 尊敬的Ti工程师你们好，我现在利用MMWAVE-DSP-EVM与MMWAVE-RF-EVM级联配置单发单收进行数据采集，这是我修改的官方的Cascade_Configuration_MIMO脚本：
--[[
Sequence being followed
A. CONFIGURATION
1. Connecting to TDA
1. Configuring Master from SOP till Channel Config…
Part Number: MMWCAS-RF-EVM 具体测试场景是雷达板前方放置一块金属板，用的参数配置均为官方提供的默认脚本，序号60之后的一维距离向存在异常，如图1所示，能否告知是什么情况，同样位置我的待测物体是金属小球就很正常 -- Profile configuration
local profile_indx = 0
local start_freq = 77 -- GHz
local slope …
