如下回复:
I checked the internal database and the description of LSB bit of address 0x07 says " Vca i/p clamp voltage inc". So from this description, it seems that this bit adjust the voltage of internal clamp at VCA input.
Part Number: BQ76952
If all Enabled Protections A/B/C are 0 but Enabled PF register and configured to enable permanent failures. Does the Enabled Protections A/B/C = 0 prohibit permanent failures to trigger so fx. a FUSE will never blow ?
Example ( will…
Other Parts Discussed in Thread: TINA-TI , LMH6629 , LMH32401 , OPA847 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1560103/opa847-large-overshoot-and-oscillation-problem…
Other Parts Discussed in Thread: DRV8262EVM , DRV8262 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1521620/drv8262evm-hilfe-bei-drv8262evm-single-h-bridge…
Part Number: OPA657 Other Parts Discussed in Thread: DEM-OPA-SOT-1A ,
Dear all,
here is my schematic
my PCB design is close to DEM-OPA-SOT-1A
Input is a photomultiplier tube . its parasite capacitance i estimate is 20-30pF ,and so i choose C5=0.25pF.
…