Other Parts Discussed in Thread: DRV8323 我使用drv8323配置为3x PWM mode,MCU生成svpwm,使用示波器测量低侧mos的门极,波形正常,但是高侧mos的门极电平一直为低,但是mcu使用发送6根pwm信号,配置在3x或6x,高低侧mos开关均正常,向Driver Control寄存器中写入配置可以回传得到写入的数值,但是单独使用读命令读取寄存器值,都为0.
Other Parts Discussed in Thread: DRV8305 , DRV8323 , BOOSTXL-DRV8323RS 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/651765/boostxl-drv8323rs-problem-identifying…
Other Parts Discussed in Thread: BOOSTXL-DRV8323RS 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/935038/boostxl-drv8323rs-current-overshoot-on-mosfet-switch…