Other Parts Discussed in Thread: EK-TM4C1294XL , TMS570LS1224 , EK-TM4C123GXL , UNIFLASH 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f…
Other Parts Discussed in Thread: EK-TM4C1294XL , UNIFLASH , TM4C129XNCZAD 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers…
Other Parts Discussed in Thread: EK-TM4C1294XL 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1409139…
各位老师,我想采用EK-TM4C1294XLTimer5 T5CCP0 PB2输出指定频率的方波脉冲,作了下面的程序,但一直无输出,不知道问题在哪里,请给与指正.
main()
{
// Set the clocking to run directly from the crystal at 120MHz.
g_ui32SysClock = MAP_SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ | SYSCTL_OSC_MAIN |SYSCTL_USE_PLL|SYSCTL_CFG_VCO_480…
Other Parts Discussed in Thread: TM4C129DNCPDT , SEGGER , EK-TM4C1294XL 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers…
Other Parts Discussed in Thread: EK-TM4C123GXL , TM4C123GH6PZ , TM4C1294NCPDT , EK-TM4C1294XL 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers…
Other Parts Discussed in Thread: UNIFLASH , EK-TM4C1294XL 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum…