Part Number: AWR1642BOOST 我使用的是object_data_over_can例程,SDK版本为02_01_00_04,在烧写模式下烧录ccsdebug.bin文件后,切换为调试模式后进行加载,编译操作,在编译完ARM核和DSP核后,控制台报错:
C674X_0: Power Failure on Target CPU C674X_0: Failed to remove the debug state from the target before disconnecting…
Part Number: TMS320F28379D 在运行利用emif与FPGA通讯程序时,ccs报错如下:
C28xx_CPU1: JTAG Communication Error: (Error -1135 @ 0x83383) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation…
Part Number: DLPC350 Other Parts Discussed in Thread: DLP4500
原因:DLP4500方案(DLPC350ZFF),由于 M29DW128GL70N停产买不到料,更换为 MT28EW128ABA1LJS-0SIT
问题:使用JTAG flash programmer烧录bootloader后,显示烧录成功,但无法启动,连接USB不成功。
请教下是否需要bootloader对此flash进行适配?还有其他问题导致? MT28EW128ABA1LJS…
配置交换结构的主要功能是访问 外设寄存器 ,因此它会直接连接到各种外设的寄存器接口。这些外设可以包括但不限于存储设备、输入输出设备、通信接口等。 配置交换结构通过32位配置总线将从设备与主设备(包括C66x CorePac和数据交换结构上的主设备)连接起来。
详细参考下面的附件
8726.sprabk5a_throughput.pdf
TRANSLATE with x
English
Arabic
Hebrew
Polish
Bulgarian
Hindi
Portuguese …
Part Number: CC2640R2L CCS启动调试点击运行之后,几十秒后连接断开,报错信息如下:
Cortex_M3_0: GEL Output: Memory Map Initialization Complete. Cortex_M3_0: GEL Output: Board Reset Complete. CS_DAP_0: Power Failure on Target CPU: (Error -180 @ 0x0) The controller has detected a target…