Cortex_M3_0: GEL Output: Memory Map Initialization Complete. Cortex_M3_0: GEL Output: Board Reset Complete. Cortex_M3_0: Can't Run Target CPU: (Error -2134 @ 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error…
Part Number: TMS320F28377D 你好，
我用的CCS版本是V12.2，烧录器是XDS100V3。最简单的工程，在debug时没有报错，点Resume时报下面红色字体错误。请问是什么原因？
C28xx_CPU1: GEL Output: Memory Map Initialization Complete C28xx_CPU1: If erase/program (E/P) operation is being done on one core, the other core should…
Other Parts Discussed in Thread: UNIFLASH , CC3200 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/wi-fi-group/wifi/f/wi-fi-forum/620953/cc3200-how-to-prepare-binary-image-that-to-be-used-in-embedded…
Part Number: TMS320F28388D C28xx_CPU1: Error: (Error -1044 @ 0x0) The debug probe reported an error. Confirm debug probe configuration and connections, reset the debug probe, and retry the operation. (Emulation package 9.4.0.00129) C28xx_CPU1: Trouble…
你好，谢谢你的解答，使用JTAG时TRST引脚约为2V，我将有片外电源引脚逐一测试均正常，但是使用PLECS仿真（配置如下）时出现以下错误，无法连接cpu
Error in build step #15 (Make): Make process exited with code 2:
copy /Y "E:\plecs\support_package\tsp_ti_c2000\demos\simple_model\simple_model_codegen\ControlCard_TMS320F28379D…
I modfied the CMD then the faults as follow
C28xx_CPU2: Trouble Removing Breakpoint with the Action "Finish Auto Run" at 0x863d: (Error -1066 @ 0x863D) Unable to set/clear requested breakpoint. Verify that the breakpoint address is in valid memory. (Emulation…
