Other Parts Discussed in Thread: CC3220SF , UNIFLASH
CC3220SF 程序bulid问题和烧录没问题,但点击Start 按钮就报错如下错误?该如何解决? 我在MQTT_CLIENT_SREVER范例上添加I2C驱动就这样.
Cortex_M4_0: JTAG Communication Error: (Error -242 @ 0x0) A router subpath could not be accessed. The board configuration…
Other Parts Discussed in Thread: EK-TM4C123GXL 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1119715…
Part Number: CC1310 板子是自己是自己做的,仿真器是xds110.代码是ti的 packettx例程。
第一次可以正常运行程序。一两次编译下载后,出现一下错误:
Cortex_M3_0: Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle…