每次烧写后只能调试1~2分钟，然后就出现下面警告，再然后就不能仿真了，28X CPU也不能运行了。不调试CLA只调试28X是没有问题的；
CPU1_CLA1: Can't Single Step Target Program: (Error -1091 @ 0x0) Unable to control device execution state. Reset the device, and retry the operation. If error persists, confirm configuration…
Other Parts Discussed in Thread: Z-STACK , CC2630 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread/f/zigbee-thread-forum/705509/cc2630-prompt-failed-message…
现在debug之后出现了错误：
C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package 7.0.100.0)
C28xx: Unable to determine target status after 20 attempts
C28xx: Failed…
Other Parts Discussed in Thread: CC2640R2F , CC2650 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/845785/cc2640r2f-compilation-error-on-iar-using…
Other Parts Discussed in Thread: TM4C123GH6PM , SYSBIOS 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum…
您好
您可以尝试附加此脚本吗？ 我所做的就是将DPTX速率更改为2.7Gbps。
## TI Confidential - NDA Restrictions
##
## Copyright 2018 Texas Instruments Incorporated. All rights reserved.
##
## IMPORTANT: Your use of this Software is limited to those specific rights
## granted…
