Other Parts Discussed in Thread: CC2640R2F 请问TI的工程师们，我现在在编译CC2640R2F的时候遇到一个问题，
Mon Jun 11, 2018 16:54:02: Missing or malformed flash loader specification file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 8.0\arm\config\flashloader\TexasInstruments…
CortexA8: Trouble Writing Memory Block at 0x4c000010 on Page 0 of Length 0x4: (Error -2130 @ 0x4C000010) Unable to access device memory. Verify that the memory address is in valid memory. If error persists, confirm configuration, power-cycle board, and…
Other Parts Discussed in Thread: CC2541 , CC2540 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1055470/cc2541-adding-i2c-support-to-the-sample-project…
您好
您可以尝试附加此脚本吗？ 我所做的就是将DPTX速率更改为2.7Gbps。
## TI Confidential - NDA Restrictions
##
## Copyright 2018 Texas Instruments Incorporated. All rights reserved.
##
## IMPORTANT: Your use of this Software is limited to those specific rights
## granted…
Other Parts Discussed in Thread: CC1310 我用 CC1310 LaunchPad,
CCS v8.1.0.00011
原本 load program 都 OK,
今天 load program fail, 出現下列訊息, 請問要如何修復 ? 謝謝
Cortex_M3_0: Trouble Reading Register REG_ENDIAN: (Error -261 @ 0x0) Invalid response was received from the XDS110…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 /* --COPYRIGHT--,BSD_EX
* Copyright (c) 2012, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification…
CCS调试出错：连接仿真器成功，一开始resume运行没问题，
但过了一会报错。console出现以下内容：
C28xx: Error: (Error -1041 @ 0x0) The emulator reported an error. Confirm emulator configuration and connections, reset the emulator, and retry the operation. (Emulation package 5.1.450.0) C28xx:…
