Other Parts Discussed in Thread: TMS320F280037 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1256503/tms320f280037-inconsistent…
Other Parts Discussed in Thread: HALCOGEN 大家好，我用CCS7.2烧写程序时出现如下错误：
红色部分的字为：
CortexR4: Error: (Error -1170 @ 0x0) Unable to access the DAP. Reset the device, and retry the operation. If error persists, confirm configuration, power-cycle the board…
硬件环境：研旭28335开发板、XDS100V2仿真器
软件环境：CCS6.0
目前遇到的问题：
1、连接仿真器时：RUN-conncet target之后显示连接成功
过大概10s后，显示如下报错信息
C28xx: Error: (Error -150 @ 0x0) One of the FTDI driver functions used during configuration returned a invalid status or an error. (Emulation package…
我选用的是 C6747 芯片，设备在调试过程中，我用万用表测量信号，偶尔会出现程序跑飞的情况，停止运行， Console 栏提示：
C674X_0: Power Failure on Target CPU C674X_0: Failed to remove the debug state from the target before disconnecting. There may still be breakpoint op-codes embedded in program memory. It is…
//******************************************************************************
// MSP430G2xx3 Demo - Timer_A, PWM TA1, Up/Down Mode, DCO SMCLK
//
// Description: This program generates one PWM output on P1.2 using
// Timer_A configured for up/down…
First thank you for your answers.
Now I'm confused with "the Embedded Wrokbench function profiler". This is provided by TI company or others? How can I use this profile in my program? Can you give me some examples or datasheet. Thank you very much.…
