Other Parts Discussed in Thread: EVM430-FR6043 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1129990/evm430-fr6043…
Part Number: EVM430-FR6043 使用EVM430-FR6043开发板与电脑进行连接时,GUI界面显示错误:
“More that one HID devices with the same VID/PID detected. Only one device may be connected.”
然而PC并未连接其他HID器件。
经观察,使用USB将开发板与电脑进行连接之后,标志HID Bridge连接正常的led202先正常闪烁,闪烁三次之后熄灭(每次均如此…
Other Parts Discussed in Thread: EVM430-FR6043 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1022502/evm430-fr6043…
Part Number: EVM430-FR6043 女士,先生,好!
在运行MSP430FR6043EVM_USS_Gas_Demo.projectspec时,当UPS0 to UPS1 Gap 小于500ms时就会出现Stop Error 103:Time between measurements is greater than UPS0 to UPS1 Gap. 请问应该如何解决?具体参数设置如下: