Part Number: CC2640R2F
如上图所示,当仿真运行到配置IOID17(TDI)管脚时,CCS11的控制台输出最后一张图片提示,此后无法再次烧入,需要借助Flash Programmer 2的Forced mass erase功能后才能再次烧入,请问这个问题如何解决,需要如何配置,谢谢。
这边是中文论坛,直接用中文问问题即可。 1、请先下载安装FLASH-PROGRAMMER,地址: 然后在下面路径下可以找到出厂固件 C:\Program Files (x86)\Texas Instruments\SmartRF Tools\Firmware\SmartRF05EB 2、The CC2544 USB dongle that is included in the kit comes preprogrammed such that it can be used as a MASTER…
Other Parts Discussed in Thread: TMS320F28031 , UNIFLASH 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1560936/tms320f28031-c28xx…