Part Number: TPS25947 Other Parts Discussed in Thread: PCA9535 Dear TI:
I want to design a power switch circuit with TPS259470 ,But Some Question:
1.My Circuit Designe
EN/UVLO Connect to PCA9535, GPIO Level is 5V,TPS259470 is controlled by I2C bus;When…
Hi team:
I searched for relevant issues in the above link. In the question, it is mentioned that "Enabling I2C CRC enables the I2C-INVALID-ADDR-ERR check" and "The GUI automatically reads register 0x4A (EEPROM-PROG-CMD) as part of the register map, but…
配置交换结构的主要功能是访问 外设寄存器 ,因此它会直接连接到各种外设的寄存器接口。这些外设可以包括但不限于存储设备、输入输出设备、通信接口等。 配置交换结构通过32位配置总线将从设备与主设备(包括C66x CorePac和数据交换结构上的主设备)连接起来。
详细参考下面的附件
8726.sprabk5a_throughput.pdf
TRANSLATE with x
English
Arabic
Hebrew
Polish
Bulgarian
Hindi
Portuguese …
Part Number: ADS7830 Hello, while working on the design, I encountered some issues for which I couldn't find relevant answers in the forum. When using the ads7830 chip, I noticed that if I don't receive a response from the device address or continue sending…
Other Parts Discussed in Thread: TPS552882 , TPS55288 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1342457/tps55288-fb-design-if-no-i2c 器件型号: TPS55…
请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 您好、Joseph:
我使用 TPS546A24AEVM-PH 进行初始测试。 我 在 PC 中安装了 Fusion Digital Power Designer GUI。 我不确定、能否使用 Aardvark i2c 主机适配器通过 Fusion Digital Power Designer GUI 与 EVM 通信? 或
Fusion Digital Power Designer…