这几个电流是这么定义的：
Iik------This is the maximum current that can flow safely into an input terminal of the device at voltages above or below the normal operating range.
Iok------This is the maximum current that can flow safely into an output terminal of the…
Other Parts Discussed in Thread: PMP9256 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/796699/lm5021-12v-input-to-12v-output-with-isolator-design…
Other Parts Discussed in Thread: OPA695 While this design may still yield acceptable results in the application, it is a simple matter to adjust these resistor values slightly to get perfect gain match from the two output currents to the amplifier output…
Other Parts Discussed in Thread: ADC3224
如上图所示所采集到的数据是在没有任何输入的前提下所得到的。
第一张图片所得的数据是在打开ADC3224 内部斩波器所得的双通道采样数据；第二张图片所得的数据为关闭斩波器所得。采样频率为1024MHz。
由数据可见在没有输入的前提下所得到的数据为噪声，该数据明显过大。
请教使用过或者熟悉该款AD转换芯片的工程师有没有遇到这样的情况，如遇到望指教解决方案！不甚感激，谢谢！
按照使用说明上写的：
Connect USB connector to the Piccolo (CC2803x) controller card for emulation. Use an external +12Vdc supply at JP1 to power up all the control circuit for now. By default, Piccolo controller is enabled to boot from FLASH and run the BLPFC code…
可以参考hci.h
/******************************************************************************* * @fn HCI_EXT_ExtendRfRangeCmd API * * @brief This HCI Extension API is used to Extend Rf Range using the TI * CC2590 2.4 GHz RF Front End device. * * Related Events…
