Other Parts Discussed in Thread: TPS43060 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1618766…
Part Number: LDC1101
Hi,
I want to detect the vibration characteristics of a 10mm-thick aluminum alloy crossbar with a measurement range of 0.5–3mm, using the LHR (High-Resolution Inductance) mode. The sampling rate is set to 10 kSPS.
Now I need…
Part Number: OPA891 I have a 0~20mV differential signal ,input common-mode voltage is 12V，signal bandwidth is 10MHz。target Gain is 25V/V，output common-mode voltage is 0V。
I select three OPA891 form an instrument amp as the schematic below。
In the first…
Part Number: LM62460 Other Parts Discussed in Thread: LM61480 Hi:
I used two LM62460 / LM61480 buck ICs for 25V to 12V and 25V to 18V；
The 25V to 12V circuit often burned out in input pin（VIN1&VIN2）when IC powered on.The 25V to 12V circuit had never happened…
Part Number: UCC28631 Hello,
I am currently using the UCC28631 in a high-voltage-input flyback converter with an input voltage range mainly between 400 VDC and 600 VDC.
I am experiencing a startup issue that appears to be strongly dependent on the input…
Part Number: TPS25750EVM Other Parts Discussed in Thread: BQ25731 , Hi Ti Team
If I use Type-C input voltage (PD Max 100W), will it use BATT (TP3) as the output?
Can I pin out a wire from the TP3 pin and charge a device, such as a tablet or laptop?
If it…
Other Parts Discussed in Thread: PMP23454 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1529997…
Part Number: TPS62A01
您好！在 WEBENCH ® POWER DESIGNER 看了下，没有推荐前馈电容。这个值是按规格书上的选120PF吗？
Input:
DC 3.4 V - 4.4 V
Output:
3.3 V at 0.1-0.5 A 是不是3.3V不需要这个前馈电容呢。
