Part Number: MSP430F2618 Hi
I'm using MSP430F2618 DAC12 modulel to generate an analog value as the Vin+ input of a comparator. the schematic is shown as following. The reference voltage is supplied by a MAX9015 which has 1uA output capacity.
First…
Hello, links. There is an inconsistency between the PSPICE model (REV E) provided on the official page of the TLV3604 and the TLV3604 model used in the TLV3601-based GaN FET driver circuit reference design in TINA-TI.
The model used in the reference design…
Other Parts Discussed in Thread: LM25185 , LM5181 , LM5185EVM-SIO 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1563557/lm25185-drive-three-outputs…
Other Parts Discussed in Thread: AM62L , AM625 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1507929/faq-am62l-am62l32-am62l31-design-recommendations-custom-board-hardware…
Thank you for your reply. First, I made an error in the test this morning, so I re-conducted the test. I found that there is no waveform between HO and HS. The HO-HS waveform I expected is a square wave with the same frequency as the input waveform and…
Part Number: DLPC350 Other Parts Discussed in Thread: DLP4500 , Dear TI expert!
We are using the DLPC350 + DLP4500 for projection design, with the following requirements: Input graphics via RGB interface only throughout the entire process. Select trigger…
Part Number: SN74LVC1G125-Q1 In our design, we have the input of 1P1G125QDCKRQ1 ramping up earlier than it's supply voltage, will this cause chip damage or abnormal performance？
I also captured oscillating output of this chip while the input kept high…
