E2E™ 设计支持
E2E™ 设计支持
  • 用户
  • 站点
  • 搜索
  • 用户
  • E2E™ 中文设计支持 >
  • 论坛
    • 放大器
    • API 解答
    • 音频
    • 时钟和计时
    • 数据转换器
    • DLP® 产品
    • 接口
    • 隔离
    • 逻辑
    • 微控制器
    • 电机驱动器
    • 处理器
    • 电源管理
    • 射频与微波
    • 传感器
    • 站点支持
    • 开关与多路复用器
    • 工具
    • 无线连接
    • 参考译文
    • 存档组
    • 存档论坛
  • 技术文章
    • 模拟
    • 汽车
    • DLP® 技术
    • 嵌入式处理
    • 工业
    • 电源管理
  • TI 培训
  • 快速入门
  • English
  • 更多
  • 取消


搜索提示
找到 3,002 个结果 查看 问题 帖子 排序依据
  • RE: BQ24610: The problem I found when using BQ24610 is that when the charging voltage is 12.6V, it can be used normally; when I need to change the charging voltage to 13.2V, the battery is not charged, and the PG light is on; when I charge the battery...

    Star Xu
    Star Xu
    您好, charging voltage改为13.2V以后板子上的元件是否修改,请参考 SLUC175 — bq246xx Calculation Tool V1.5 和schematic checklist确认您的电路. 5100.BQ24610_SchematicChecklist.pdf
    • 3 年多前
    • 电源管理
    • 电源管理论坛
  • Answered
  • TPS53915: tps53915问题点及XRP7724电源芯片推荐。

    user3531526
    user3531526
    已解决
    Part Number: TPS53915 Other Parts Discussed in Thread: TPS65400 你好, 请教2个问题: 1,我们评估TPS53915电源芯片,我看datasheet VOUT:0.6V-5.5V没有问题,但是看到PMbus调整输出电压范围只有+12%- -11.6%,这样比如我设置4V,那么调整范围只有3.536-4.48V,范围比较小还是我理解的有误? 2,可以帮忙推荐下类似XRP7724的替代料吗?要求12V输入,1V-5.5V通过I2C或者PMbus可调输出…
    • 已回答
    • 2 年多前
    • 电源管理
    • 电源管理论坛
  • RE: PLLATINUMSIM-SW: 我想在最后的VCO处产生一个5.5~6.1GHz的斜坡信号,想问一下这个仿真软件怎么用

    Vivian Gao
    Vivian Gao
    PLLatinumSimUsersGuide有写这个工具的用法。 PLLatinumSimUsersGuide.pdf
    • 10 个月前
    • 时钟和时序
    • 时钟和计时论坛
  • [参考译文] PMP6712:更改输入电压和输出电流的设计参数

    admin
    admin
    Other Parts Discussed in Thread: PMP6712 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1490996…
    • 1 年多前
    • 仿真、硬件和系统设计工具(参考译文帖)
    • 仿真、硬件和系统设计工具(参考译文帖)(Read Only)
  • TMAG5131-Q1: TMAG5131C5D

    ?? ?
    ?? ?
    TI 认为已经解决
    Part Number: TMAG5131-Q1 问题:我们想使用此器件进行开关控制切换;利用感应磁体来实现该功能,在进行仿真得时候遇见了问题,我们根据仿真得出来一个结果,但是没有理解这个仿真结果,请帮忙看看? 仿真原因:我们磁体一共有两个位置,位置1和位置2;在位置1是我们需要传感器输出高电平或者低电平,在位置2则输出与位置1相反得电平;具体设计见附件PDF 1、Device output1:代表磁体在不同位置时,传感器输出得高低电平得结果吗? 2、 Magnet Field Density vs…
    • 1 年多前
    • 传感器
    • 传感器论坛
  • TPS2373-4EVM-758: TPS2373-4 design for IEEE802.3bt PD

    brian chen
    brian chen
    TI 认为已经解决
    Part Number: TPS2373-4EVM-758 Other Parts Discussed in Thread: UCC2897A Dear Sir We plan to design a PD splitter product. but two solution (TPS2372-4 and TPS2373-4) Which one is more suitable solution. Our require input power only form PSE, Output can…
    • 3 年多前
    • 电源管理
    • 电源管理论坛
  • DLPC8445: How can I obtain the DLPC8445 control program tool?

    show li
    show li
    Part Number: DLPC8445 Use the Android motherboard to output a 4K VBO signal and send it to the DLPC8445. Input instructions to the DLPC8445 via I2C. However, the display failed to succeed. Therefore, I want to verify the problem using auxiliary tools. …
    • 11 个月前
    • DLP 产品
    • DLP®︎ 产品论坛
  • Answered
  • RE: BQ24610: 充电电压输出不正确,求助

    Star Xu
    Star Xu
    已解决
    您好,请参考schematic checklist 确认您的电路是否正确。 2061.BQ24610_SchematicChecklist.pdf
    • 3 年多前
    • 电源管理
    • 电源管理论坛
  • RE: BQ24610: BQ26410初上电池就炸机

    Star Xu
    Star Xu
    您好,请参考schematic checklist 确认您的电路。 5707.BQ24610_SchematicChecklist.pdf
    • 3 年多前
    • 电源管理
    • 电源管理论坛
  • Answered
  • BUF802: S21 Parameter test

    longgang liu
    longgang liu
    已解决
    Part Number: BUF802 设计参数按照BUF802DATASHEET 的11.2章节进行了设计,输入端口为高阻配置 测试输入端口S21参数如下图1所示,测试点为经过C26以后的高频部分: The design parameters are designed in accordance with section 11.2 of BUF802DATASHEET, and the input port is high resistance configuration The parameters…
    • 已回答
    • 3 年多前
    • 放大器
    • 放大器论坛
<>

未找到您搜索的内容?发布一个新问题吧。

  • 发布新问题