您好，请参考下面的内容
As this is a charge controller, the thermal dissipation/heat will be localized on the external power stage, i.e your external switching FETs and inductor. The key top optimizing thermal performance is making sure you have enough vias to ground…
Part Number: BQ25710
Hi, Ti guys I have a confusion about the BQ25710 work behavior when from boost mode transition to buck-boost mode: 1. VBUS=10V, VSYS=12.4V, Vsys loading=2A, BQ25710 work in boost mode, when VBUS change from 10V to 12V，BQ25710 will enter…
您好
确认一下这个过程
Launch target configuration
both cores should be disconnected
"Connect Target" for the c28x
c28x will be suspended
It may throw an error about not having the debug information at this point, that can be ignored
Load the .out…
In some high-frequency switching circuits, the Miller effect of MOS tubes has the unpleasant disadvantages of extending the switching frequency, increasing power consumption, and reducing system stability. As shown in the figure below, there is a small…
The maximum switching frequency is defined by the driver's power dissipation, FET gate charge, and supply voltage.
https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/788867/faq-maximum-operating-frequency
