Part Number: LP-AM243 Hi,
when i run sdk demo on lp-am243, i met a problem, the message in Console and Terminal is that "[MAIN_Cortex_R5_0_0] ERROR: Board_flashOpen:199: FLASH open failed for instance 0 !!!"
i think there is no communication…
Other Parts Discussed in Thread: AM2434 , TM4C1294NCPDT 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum…
Other Parts Discussed in Thread: UNIFLASH , LP-AM243 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1400227…
Other Parts Discussed in Thread: SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1415283/lp…
Part Number: LP-AM243 TI 工程师,
您好!!!
在ethernetip_adapter_demo的例程的上,加入串口DMA,程序在DMA_Init时,发生宕机,并进入了HwiP_undefined_handler中断。
可以确定一下, ETHER/IP协议中和串口DMA可以同时运行吗
Other Parts Discussed in Thread: UNIFLASH 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1371686/lp…
Other Parts Discussed in Thread: AM2434 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1430403/am2434…
Other Parts Discussed in Thread: SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1392021/lp…