Part Number: LP87702-Q1 Other Parts Discussed in Thread: LP87702
our customer request for chip process parameters, and, what is the die process of LP87702? 90nm or smaller?
Hi
VANA OVP is set to 4.3 V (typical) with 3.3 V input and boost enabled.
VANAOVP is selected in OTP by VANA_OVP_SEL and is a fixed factory setting(所以如果要设置5.8V保护,需要通过程序配置的VANA_OVP_SEL = 0)
Part Number: IWR1843 Other Parts Discussed in Thread: LP87702 我们参考官方原理图,采用毫米波雷达芯片IWR1843+电源管理芯片LP87702进行雷达设计。
我们需要实现通过软件控制IWR1843进行热复位,此复位主要是给IWR1843升级程序后需要进行的操作,这要如何实现?
希望回复,谢谢。
Part Number: LP87702-Q1 Other Parts Discussed in Thread: LP87702 1、我按照如下流程对LP87702进行配置:
Pmic_wdgCtrlEnable(1); 解锁0x34寄存器,并给0x35寄存器写1,表明看门狗由WD_DIS信号控制开启 Wdi_pulseInit(); 初始化喂狗引脚并将其拉低 Watchdog_clkInit(); 初始化WD_DIS引脚并将其拉低 Watchdog_clkEnable…
Other Parts Discussed in Thread: IWR1843 , IWR1843BOOST 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1240294/iwr1843-the-power-supply-ripple-noise-gets-worse 器件型号: IWR1843 大家好…