Thank you for your patience. Here are the answers to your questions.
All Table and Section references (unless otherwise noted) come from this document: TDA4VPE-Q1, TDA4APE-Q1 Jacinto Automotive Processors datasheet (Rev. A)
1. Yes, the TDA4VPE has 6 Enhanced…
Other Parts Discussed in Thread: MCF8316D-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1612466/mcf8316d-q1-help-select-best-part-for-brushless-motor-foc…
Other Parts Discussed in Thread: MSP-FET 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1506769/ulc1001-drv2911evm-on-board-msp430-programming 器件型号: ULC1001-…
Other Parts Discussed in Thread: DRV8353RS-EVM , DRV8353M , DRV8353 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1550135/drv8353rs-evm-and-drv8353smrtat-sensorless…
Other Parts Discussed in Thread: DRV8849 , DRV8434A , DRV8849EVM 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1527611/drv8849evm-can-t-connect-after-msp-up…
Other Parts Discussed in Thread: DRV8461EVM , DRV8461 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1568014/drv8461-motion-controller-with-trapezoidal-or-s…
Other Parts Discussed in Thread: MCF8316AEVM , MCF8316A 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1548857/mcf8316a-using-mcf8316aevm-through-wire-to-control…
参考下方的内容重新尝试。
[参考译文] DRV8214EVM:VM 电压保持在0.0V - 电机驱动器(参考译文帖)(Read Only) - 电机驱动器(参考译文帖) - E2E 设计支持
DRV8214EVM: I added the Missing R12 (56KOHM) but VM readings in GUI are off by 60%. Also can't update GUI to 2.0.2 it seems always stuck at "update in progress…