你好,
请参考下面论坛讨论:
(+) MCU-PLUS-SDK-AM263X: TMDSHSECDOCK - Arm-based microcontrollers forum - Arm-based microcontrollers - TI E2E support forums
Thanks,
Chris
Part Number: MCU-PLUS-SDK-AM243X 安装了"MCU+SDK for AM243x-09.02.00.50",在ccs中导入工程hello_world->r5fss0-0_freertos,直接编译后报错如下:
makefile_ccs_bootimage_gen:75:recipe for target 'all' failed.
makefile_ccs_bootimage_gen:75: recipe for target…
Part Number: MCU-PLUS-SDK-AM243X Other Parts Discussed in Thread: AM2432 请问,在am2432的usb设备中,我设置了两个接口,每个接口6个端点。当我打开第2个接口的端点0x85和0x05,以及0x86和0x06的时候,端点打开失败。更改代码后,我先打开0x85和0x05,端点2的地址改为0x86和0x06,发现同样打开失败。 请问为什么打开0x05和0x85,以及0x06和0x86端点会失败呢?
Part Number: MCU-PLUS-SDK-AM243X Other Parts Discussed in Thread: SYSCONFIG
你好,我想使用普通以太网口CPSW(非ICSSG)发送/接收数据(目前是EVM开发板测试,通过RJ45口和PC相连,以后则是通过背板和其他CPU直接通信,所以走不到ip层,而是使用自定义的总线报文),MAC地址在我要发送的frame里面,我在配置页面增加了Enet(CPSW)外设,还需要对CPSW做什么配置吗?需要增加ETHPHY驱动吗?(我看页面中ETHPHY…
您好
官方SDK中没有支持MCU Only mode模式的接口。
可以参考 手册 的6.10.2.6的说明
Entry into MCU Only state is accomplished by executing a power down sequence except for the 4 MCU domains that remain energized. Exit from MCU Only state is accomplished by executing a power up sequence…