Other Parts Discussed in Thread: TDA4VM 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1198029/tda4vm-failure-occurred-when-i-built-the-sdk-with-yocto 器件型号: TDA4VM 大家好…
zhao ge 说: 1.CS的配置接口调用是否正常,同时16Mhz情况下关于ratio参数的计算方法是否正常,16Mhz/32678hz ≈489
看起来没什么问题。我们有个寄存器版本的例程,您也可以参考
/* --COPYRIGHT--,BSD_EX
* Copyright (c) 2014, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and…
1. To change the value of SpiBaudrate, you need to calculate the desired baud rate based on the clock frequency and the desired SPI clock rate. The formula for calculating the SPI baud rate is:
SPI Baud Rate = (SPI Clock Frequency) / (2 x SpiBaudrate…
Other Parts Discussed in Thread: TMS320F28335 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1236383/tms320f28335-tms320f28335-example_2833xadcsoc…