Other Parts Discussed in Thread: PMP9776 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/575529/msp430g2332-source-code-of-pmp9776-reference-design…
Other Parts Discussed in Thread: MSP430G2332 最近项目用到这这个功能,我发现进入debug模式后,CCTL0和CCTL1的值均是0x1,对于CCTL0来说,就是USISWRST为高电平。对于CCTL1就是USIIFG是高电平。也就是说,系统默认的情况下已经产生了中断标志位,那么,第一个问题:这个标志位用不用清零?
然后,我尝试着将这个标志位清零,然后,当我设置USICNT的时候,比如USICNT=8(官方例程就是这样的),首先,寄存器的值依然是0x00,其次…
用户手册有提及:
Ports P1 and P2 have interrupt capability. Each interrupt for the P1 and P2 I/O lines can be individually enabled and configured to provide an interrupt on a rising edge or falling edge of an input signal. All P1 I/O lines source a single interrupt…
Other Parts Discussed in Thread: MSP430G2332 背景说明:
芯片: MSP430G2332,IPW20; 购买渠道:深圳嘉立创商城
硬件环境: 自己设计的PCB板,产品研发处于准备小批量试产阶段;工具:LSD-FET430UIF仿真器,LaunchPad仿真器,USB编程器
软件环境: IAR 6.30, win7 64位旗舰版,已用该电脑做过多个MSP430的项目;
问题细节描述:
1、上电程序正常运行,过不定的时间后,程序会死机,芯片发热,LDO跟着发热,红外测温显示MCU温度60度…
Other Parts Discussed in Thread: MSP430G2332 , MSP-FET
开发环境:Win7系统,FET-Pro430V3.0烧写软件,MSP430-EXP430G2 LaunchPad,下载方式为4wire-JTAG,MCU为MSP430G2332。用来烧写程序,能正常烧进去,而烧写熔丝位,却失败,如上图所示。 网上搜了很多资料都没有明确说明LaunchPad是否能烧写熔丝位。想确认一下 MSP430-EXP430G2 LaunchPad 是否能烧写熔丝,该如何操作呢…