Other Parts Discussed in Thread: MSP432E401Y , TM4C1294NCPDT 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers…
Other Parts Discussed in Thread: INA210 , MSP432E401Y 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum…
Other Parts Discussed in Thread: MSP432E401Y 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1462488…
Part Number: MSP432E401Y Hello,
I build my project and error as
<Linking> error #10056: symbol "Peripheral" redefined: first defined in "./INITMCU.obj"; redefined in "./main.obj" error #10056: symbol "Peripheral" redefined…
Part Number: MSP432E401Y 我在使用这款单片机时,前一天用过他的j13口进行对一个小的串口屏供电,是可以正常运行的,第二天就不通电了,用的使用充电宝给他供电,电源灯没亮,我就检查了一下,后面我发现把板卡电源的跳线帽拔了电源灯可以亮,但是我把GND就是板卡供电的GND接上就不亮了,求求工程师解答这种是不是没救了,我还使用过其他通过USB供电,外部供电,板载灯没亮,
Other Parts Discussed in Thread: MSP432E401Y 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1552304…
Other Parts Discussed in Thread: MSP432E401Y , SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum…
Other Parts Discussed in Thread: MSP432E401Y 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1532149…
Part Number: MSP432E401Y
研读MSP432E401Y的参考手册时发现可以实现双ADC实现双倍的采样率
f or a sample rate of two million samples per second at 16 MHz, the TSHn field of all of the sequencer samples of both ADCs must be programmed to 0x0 and the PHASE field of one of the ADC modules…