Part Number: J721EXSOMXEVM
I used Yocto to build the tisdk-base-image and successfully installed all the middleware.
However, I encountered the following issue during the process: After recompiling the kernel files, I deleted deploy-ti to ensure that the…
Thank you for your reply. I tested the tisdk-base-image and successfully installed all the middleware.
However, I encountered the following issue during the process: After recompiling the kernel files, I deleted deploy-ti to ensure that the generated…
Part Number: AWR2243BOOST Other Parts Discussed in Thread: AWR2243 , , UNIFLASH , MMWAVE-MCUPLUS-SDK , AWR1243BOOST , AWR1243 使用uniflash V8.6下载mmwave_dfp_02_02_04_00\mmwave_dfp_02_02_04_00\firmware包中的xwr22xx_mss_rprc.bin和xwr2xxx_radarss_rprc.bin作为固件烧录到AWR2243Boost的板载Flash中…
Part Number: MMWCAS-DSP-EVM When running the Cascade_Capture.lua script to capture data, I just want to output the captured data file to the SSD default file written inside the LUA script, and I don't want to transfer it to the PC at the same time, because…
你好，
不支持mmwave studio。采集数据请参考mmwave mcuplu sdk user gudie里的 4.6. How to run 2-Chip cascade application (Applicable for only AM273X + 2xAWR2243 EVM)章节内容。
Thanks，
Chris
Other Parts Discussed in Thread: LMH6554 , TINA-TI 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/amplifiers-group/amplifiers/f/amplifiers-forum/1267255/lmh6554-help-i-can-t-run-tina-ti-transient-analysis-past-13…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您不需要传递任何附加参数、因为 mount 命令会自动检测格式
root@am62xx-evm:~# mount /dev/mmcblk0p1 /mnt
[ 122.510060] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.…
With AM437x HS device (i.e. AM4378BZDN100S), first thing is running TI OTP key programming tool to program the user key material on target board. After the customer key are successfully programmed, root-of-trust secure boot is enforced such that only signed…
