Hi,
For higher resolution for example, 1920x1080 you can follow the below steps.
1. Please run setup_cameras.sh available under /opt/edgeai-gst-apps/scripts on the target EVM, after modifying the script for 1920x1080 resolution.
https://github.com/TexasInstruments…
Other Parts Discussed in Thread: AWR6843ISK , AWR6843 , AWR1843AOP 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1584223/awr6843isk-error-while-running-a-obstacle_detection_aop…
Thank you for the question.
Generally speaking, you will expect some performance hit when you increase the setting from 8bit to 16bit.
My understanding is that you are using mixed-precision model, and the inference performance (speed) is not good enough…
Thank you for the question.
Generally speaking, you will expect some performance hit when you increase the setting from 8bit to 16bit.
My understanding is that you are using mixed-precision model, and the inference performance (speed) is not good enough…
Hi
在readme的指导上明确说明
Note: This application supports both SPI and I2C mode of operation. Refer to mmwaveconfig.txt on choosing the mode of operation. How to run: 1. Connect AWR2243 ES 1.0/ES 1.1 boosterpack and DCA1000 EVM to PC. 2. Erase sFlash before…
When I was running the DCC tuning tools, I selected VPAC3 and ran the single-camera app of j722s-evm-10_00_00_05. However, the DCC tuning tools stopped running when I was collecting raw images.
