Hi，TI的FAE们，sorry，看到一篇ADI的关于如何设计ad的文档，有些不解。
文档中， step 1 and 2，里面说一个250mVp-p的10Khz信号，25uvp-p的noise,算信噪比的时候，noise的RMS值是25uv/6,这个分母6是怎么计算的？
还有，step4 里面的
How much noise is allowed at the input of the opamp?
Remember that we need to design an overall solution…
CCS5.5
C6657EVM
我现在需要把调试好的程序固化到芯片的nor-flash里
我用TI提供的norwriter_evmc6657l 工程
看了它提供的README.txt
NOR Writer Utility
NOR Writer is a simple utility to program a CCS format image/data file to the NOR flash.
Steps to program the NOR:
1. Be sure to set the boot…
您好
1, 不能同时连接EV2400和单片机，会通讯冲突。
2, 请参考TRM section 16.4 of the BQ78350-R1A. You need to set the [FIXED_ADDR] bit to zero in data flash and then use a resistor divider on the SMBA pin to set the voltage corresponding to the address you want to set.
3，请参考下面文档…
