Other Parts Discussed in Thread: SN65DSI83 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1350261/sn65dsi83-no-picture-with-external-refclk-test-pattern-okay-dsi-clock…
Other Parts Discussed in Thread: SN65DSI83-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1341507/sn65dsi83-q1-vcore-power-supply 器件型号: SN65DSI83-Q1 您好!
大家好。
是 IC (SN65DSI83…
Other Parts Discussed in Thread: SN65DSI83-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1408968/sn65dsi83-q1-is-there-any-risk-if-the-video-resolution-size-is-less…
Other Parts Discussed in Thread: SN65DSI83-Q1 , SN65DSI83 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1287109/sn65dsi83-q1-ibis-model-file 器件型号: SN65DSI83-Q1 主题中讨论的其他器件…
Other Parts Discussed in Thread: SN65DSI83 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1119021/sn65dsi83-imx8mm-sn65dsi83-u-boot-driver-support-for-displaying-boot-…
Other Parts Discussed in Thread: CDCEL913 , SN65DSI83-Q1 , SN65DSI83 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1368353/sn65dsi83-q1-causes-and-solutions-for-occasional…
Other Parts Discussed in Thread: SN65DSI83-Q1 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1346015/sn65dsi83-q1-please-review-the-schematic 器件型号: SN65DSI83-Q1
尊敬的 TI 专家…
Part Number: SN65DSI83-Q1 Other Parts Discussed in Thread: SN65DSI83 , 看到SN65DSI83的上电时序的参考波形图,EN是当DSI DATA 处于LP-11状态时将引脚拉高。
我们的板子上EN引脚用了复位芯片,由于该芯片本身有200ms的延迟,导致在LP-11状态已经过了之后才去拉高,如下图所示。此时驱动会提示“failed to lock pll”,这个无法正常工作也是符合预期的。
于是,我们将EN引脚的复位芯片去掉…