Other Parts Discussed in Thread: SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/957758/cc2642r-how-to-shorten-connection-interval 器件型号: C…
Other Parts Discussed in Thread: SYSCONFIG , TMS320F28377D 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1193403/tms320f280037c-interrupt…
OADUAPP是哪个例程,off chip OAD?
1、Generated指:an internal flash region is automatically generated
Pointer指:provide a pointer to the memory location to the predefined internal flash region
2、可以通过sysconfig修改,见下图
3、这是默认地址,可以如2修改
4、 NVS_WRITE是写入flash,使用flash时,每次擦除后只能写一次…
Other Parts Discussed in Thread: CC2652R7 , SYSCONFIG , CC2674R10 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread/f/zigbee-thread-forum/1234334/cc2652r7-ti…
Other Parts Discussed in Thread: SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1082879/lp…
Other Parts Discussed in Thread: CC2652RSIP , CC2520 , SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/zigbee-thread-group/zigbee-and-thread/f/zigbee-thread-forum/1092284/cc2652rsip-emulate…
Other Parts Discussed in Thread: SK-AM62 , SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1180114/sk-am62-linux-processor-sdk-bt_en-pin-iopad-register-details…
Other Parts Discussed in Thread: SYSCONFIG 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/959889/am437x-board-porting-with-ti-rtos-sdk-integrating-pinux-tool-outputs…