Other Parts Discussed in Thread: PMP21462 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum/1547369…
Hi
Unfortunately no, there is no simulation model available for the DRV401. We did look into this but the resources to accurately model the magnetic field and its interaction with an external hall sensor is not possible at this time.
Other Parts Discussed in Thread: PMP41114 , PMP23338 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools…
Other Parts Discussed in Thread: PMP9656 , PMP3162 , PMP8861 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design…
Hello,
RE is an environment sensor and should be placed above the max liquid level. I also recommend referencing the design below.
https://www.ti.com/lit/ug/tidu736a/tidu736a.pdf
No, we are not able to do electric field simulation for this type of design…
您好
Functionally the schematic looks correct. I would recommend using an RCD clamp vs a TVS clamp. It helps dampen the ringing at the switch node which will improve EMI and power stage performance.
The output voltage is sense and controlled by VS pin…
