Other Parts Discussed in Thread: DRV8711 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/958034/drv8711-reference-designs-around-the-drv8711 器件型号: DRV8711 电机驱动团队…
Part Number: SLUC222 Other Parts Discussed in Thread: UCC28950 , TINA-TI
I am simulating a PSFB converter using UCC28950 in TINA-TI. My input voltage range is 43V to 58V and output voltage is 240-385V ,output power is 4KW. I am seeing an issue with the simulation…
Other Parts Discussed in Thread: TPS65983B 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/987539/faq-tps65983b-tida-03027-reference-design-materials 器件型号: TPS65983B
大家好…
Part Number: TPS51604 Other Parts Discussed in Thread: CSD87333Q3D , UCC27211
我想使用TPS51604配合 CSD87333Q3D组成三相全桥用于电机驱动。具体情况是:
1 电源电压12~24V;
2 使用7805产生TPS51604栅极驱动需要的5V电压;
3 用MCU的PWM驱动,同时MCU的GPIO端口用两个22k电阻分压后连接nSKIP,GPIO置低时使能驱动,GPIO拉高时nSKIP经电阻分压得到1.6V左右的Tri…
Other Parts Discussed in Thread: TIDA-00203 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Other Parts Discussed in Thread: TIDA-01421 , DRV8703-Q1EVM , INA240 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system…