QC3.0 is a proprietary communication protocol. Therefore, TI has no battery chargers that are standalone compatible with QC3.0. The BQ25890H and BQ25898D plus user designed host software can be configured to work with most QC3.0 adapters as demonstrated…
Other Parts Discussed in Thread: LM7480 , LM5069 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1543342/lm7480-mil-std-1275e-surge-protection-reference…
Other Parts Discussed in Thread: TIDA-010210 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1247493/design-reference-of-3ph-anpc…
参考下工程师的回复:
apologize if I re-ask but I would like to re-ask more in detail since I have the same issue in the past with this reference design.
I have again the following question:
If you connect L1, L2 and L3 of the grid emulator to the ABC of TIDA-…
Other Parts Discussed in Thread: TIDA-050063 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1245208/tida-050063-why-is-there-2-hv--connectors-on-the…
Other Parts Discussed in Thread: TIDA-010036 , ADS131M08 , TIDA-010243 , TIDA-010037 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller…
Part Number: TIDA-01022 Other Parts Discussed in Thread: ADC12DJ3200 ,
您好,我使用 TIDA-01022 和两个TSW14J57来验证ADC12DJ3200同步。HSDC PRO使用触发模式,两个ADC之间的相位有时会跳跃一个LMFC周期。这是正常现象吗?
另外,我参考“ TSW14J57revE固件设计文档“并发现TSW14J57不支持基于 sysref 的触发模式。你有可以支持它的固件吗?
请帮忙在英文论坛上问一下…
Part Number: LMX2594 Other Parts Discussed in Thread: TIDA-01410 , LMX2486 各位TI专家,我在看这个文档:
TIDA-01410 (tidud11.pdf) Phase Synchronization of Multiple PLL Synthesizers Reference Design
第2.2.1节“相位同步理论”中,有这样一段话:
For instance, whenever a signal is…
您好,请参考下面内容:
It is difficult to know exactly why these pins were damaged. When exactly in the manufacturing process was these discovered to be damaged?
It may be the way the cells are being attached, for best robustness they should connected starting from…