Other Parts Discussed in Thread: TIDA-010010 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Other Parts Discussed in Thread: PMP41031 , TIDA-00173 , UCC28740 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system…
Other Parts Discussed in Thread: TIDA-00948 , TPS54202 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools…
Other Parts Discussed in Thread: TIDA-03028 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
I am working on synchronizing the CPTS (Common Platform Time Sync) with an external reference on our AM6254A board, which runs Linux kernel 6.1.80 on the Cortex‑A53.
Currently, I have fed a 125 MHz square‑wave signal into CP_GEMAC_CPTS0_RFT_CLK and configured…
Other Parts Discussed in Thread: TIDA-050047 , BQ25798 , TPS25751 , TPS25750 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware…
您好
Functionally the schematic looks correct. I would recommend using an RCD clamp vs a TVS clamp. It helps dampen the ringing at the switch node which will improve EMI and power stage performance.
The output voltage is sense and controlled by VS pin…
Other Parts Discussed in Thread: TIDA-00508 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…