Part Number: BQ4050
I am trying to retrieve the accumulated charge capacity data from the BQ4050 battery management IC. According to TI documentation, the Lifetime Data Block (addresses 0x60-0x64) does not explicitly provide this information. An AI assistant…
Other Parts Discussed in Thread: LM5155 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1539192/lm5156h-is-there-design-reference-for-dc-dc-boost-power…
No, It is not expected to generate ECC/parity errors by just temperature cycling the device if the temperature is within datasheet stated limits.
Could you describe if this ECC/parity error was observed on one unit only ? Or across all units or several…
Other Parts Discussed in Thread: TIDA-010232 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
您好，
接线应该没问题，因为当换能器断开时信号是正常的。您可以保持R36和R38的原值，因为它们可能会影响阻抗并引起一些振荡。 您是否按照下方所示的 Ultrasonic Flow Transmitter Reference Design 来reduce the amplifier's gain 和 configure the parameters in the GUI？然后可以在此测试条件下尝试测量信号，看看问题是否仍然存在。
