Hi，Since you have already resolved the issue, I will close this case. You may also share the resolution process for reference by other customers facing similar problems
Hello Martain Bao , It should be fine for them to share the same sense resistor. I would recommend not using vias on this path as it'll add resistance to the path and possibly affect measurements. Keep the signals on the same layer and same paths. These…
Part Number: TIDA-01606
hello
The switching and conduction losses for Q1 and Q3 in inverter mode are given in this reference design, can you provide us with the switching and conduction losses in rectification mode and how they are calculated？
THAN…
Part Number: ADS127L11
Hi Team,
We are implementing your 24bit ADC ADS127L11IPWR in one of our design we need some clarification based on the datasheet.
We are providing AVDD +Ve voltage and AVSS -Ve voltage.
as per datasheet section 8.3.6.1 AVDD1 and…
Other Parts Discussed in Thread: TVS3300 , TIDA-01461 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools…
Other Parts Discussed in Thread: TIDA-01063 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
