In our application we need to detect signals as small as 60 mV, with a required bandwidth of about 2 MHz. Could you clarify which datasheet parameter you are referring to in your explanation? Is it the 'Voltage Output Swing from Rails'?
Also,…
When I run only 1 GUI application, this issue still occurs. I observed that the problem is due to rail1 having no voltage, but how should I resolve this?
Other Parts Discussed in Thread: TIDA-010021 , OPT3101EVM 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design…
Part Number: TIDA-00421 Hi,
I am studying the example of TIDA-00421 reference design | TI.com and try to open the project in Altium designer22, but I can't find the file "SAT_LIB.schlib" that is used in the project. Could you help me?
Th…
Other Parts Discussed in Thread: TIDA-050032 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
I hope you are using the tested safertos packages for sdk 11.0
In this version I am not seeing any configINCLUDE_RUNTIMESTATS in c7x source, it is available only in r5f source. With 11.0 sdk and the mentioned safertos packages it should work without…
