Other Parts Discussed in Thread: TIDA-050023 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Other Parts Discussed in Thread: TIDA-01606 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools-forum…
Other Parts Discussed in Thread: TIDA-01606 , SYSCONFIG 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system-design-tools…
Hi，
I noticed that you had post on our English E2E forum, and it has been resolved, the link post here for others who have the same doubts for reference:
e2e.ti.com/.../am62a7-does-qspi-driver-be-supported-in-the-mcal
Hello,
RE is an environment sensor and should be placed above the max liquid level. I also recommend referencing the design below.
https://www.ti.com/lit/ug/tidu736a/tidu736a.pdf
No, we are not able to do electric field simulation for this type of design…
Other Parts Discussed in Thread: TIDA-00455 , TIDA-01005 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1260090/ds90ub964-q1-where-can-i-download-the-reference-design-code…
Part Number: TPS54302 In the datasheet of TPS54302, the typical application specifies an output current of 3A. In my design, the output current is only around 500mA. When using the calculation formulas provided in the datasheet 8.2.3.5, should I base the…
Part Number: TPS54302 In the datasheet of TPS54302, the typical application specifies an output current of 3A. In my design, the output current is only around 500mA. When using the calculation formulas provided in the datasheet 8.2.3.5, should I base the…
