Other Parts Discussed in Thread: CC2340R5 , CC2340R5-Q1 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1405625/cc2340r5-q1-does-ti-has-any-chip-supporting…
Part Number: TPS62913 Initially, I chose the TPS62913 as my buck converter chip to achieve better output noise performance, converting 15-17V to 3.5V. However, I overlooked one thing: our demo has a very light load (40mA@3.5V) and needs to control losses…
The photodiode configuration looks correct with the anode connected to the SWIN pin and the cathode connected to ground.
Could you clarify how low of a current you are trying to detect in the low-light conditions?
Is the output of +380mV a measured or…
Part Number: LP2951 Dear sir/madam
Now I use LP2951-50DRGR to provide a fixed output of 5V in my system. I found a description in the datasheet that ERROR will go low when Vout drops 6% of its norminal value. I calculate that 5V * 94% equals to 4.7V. It…
Part Number: CC2650 Other Parts Discussed in Thread: CC2540 , BLE-STACK
Dear TI Support Team / Technical Experts,
I am currently working on my Final Year Project involving the SensorTag CC2650. My objective is to implement and verify Bluetooth Low Energy…
您好，
您这个使用场景有点像OAD项目中给不同的程序分配不同的地址。
比如说您可以给您想要烧入的配置信息规定一个烧录地址区间，之后再烧录别的固件从之前那个地址之后再烧录。
不过TI并没有提供相关例程，您可以借鉴SDK中有关OAD的部分以及 SIMPLELINK_ACADEMY 中的 Bluetooth Low Energy Enhanced Over the Air Download (OAD) Fundamentals 和 Bluetooth Low Energy Enhanced Over the…
您好
In PFM mode, the controller enters pulse skipping to reduce the IQ current and improve the light-load efficiency. When this occurs, the primary controller disables its synchronization clock output, so phase shedding is not supported. In PFM mode connect…
