LE的PHY是蓝牙联盟规定的低功耗蓝牙的功能。有1M PHY、2M PHY和CODED PHY。需要进行配置才会开启使用。
具体您可以参考： Developing a Bluetooth Low Energy Application » LE 2M PHY 和 Developing a Bluetooth Low Energy Application » LE Coded PHY
Test cases are provided for the following RF modes:
Custom : Custom settings to be exported from SmartRF Studio to the smartrf_settings.c file
2-GFSK : Gaussian frequency shift keying with binary symbols, 50 kBit/s for all launchpads, 250 KBits/s for…
您好，
LE的PHY是蓝牙联盟规定的低功耗蓝牙的功能。有1M PHY、2M PHY和CODED PHY。需要进行配置才会开启使用。
具体您可以参考： Developing a Bluetooth Low Energy Application » LE 2M PHY 和 Developing a Bluetooth Low Energy Application » LE Coded PHY
Other Parts Discussed in Thread: CC2340R5 , CC2340R5-Q1 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/bluetooth-group/bluetooth/f/bluetooth-forum/1405625/cc2340r5-q1-does-ti-has-any-chip-supporting…
是的，抱歉，之前没看清是433Mhz下的data rate。目前支持的模式及分别的data rate如下：
Test cases are provided for the following RF modes:
Custom : Custom settings to be exported from SmartRF Studio to the smartrf_settings.c file
2-GFSK : Gaussian frequency shift keying with binary…
Packet Error Rate Example Application The Packet Error Rate (PER) example showcases different RF transfer modes of the CC13xx and CC2640R2. It combines tasks, events and several peripherals to a platform- independent application and runs on all CC13xx…
最新版sdk里的rfPacketErrorRate支持到4Mbps
Packet Error Rate Example Application
The Packet Error Rate (PER) example showcases different RF transfer modes of the CC13xx and CC2640R2. It combines tasks, events and several peripherals to a platform- independent…
