Part Number: DS90UB984-Q1 Hi,
it's my new project for SAIC. I want to use DS90UB941 and DS90UB984 as serdes.the project's panel resolution :2560*1440,eDP interface.pls check sch of display for me.thks!
yc.zhao TI984_156LCM.pdf
Part Number: DLPC350 Other Parts Discussed in Thread: DLP4500
原因:DLP4500方案(DLPC350ZFF),由于 M29DW128GL70N停产买不到料,更换为 MT28EW128ABA1LJS-0SIT
问题:使用JTAG flash programmer烧录bootloader后,显示烧录成功,但无法启动,连接USB不成功。
请教下是否需要bootloader对此flash进行适配?还有其他问题导致? MT28EW128ABA1LJS…
Part Number: DS90UH948-Q1
hello TI
We are debugging 983 and 988,but problem,983 Unable to access 988 through I2C pass through.
(1) hardware info:
983(i2c slave: 0xc)988(i2c slave: 0x2c)
(2) The following are the registers we have set up:
set "i2c_addr…
Other Parts Discussed in Thread: CC1310 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1339056/cc1310-rf-actual-tx-time-not-matches-calculated-on…
Part Number: BQ34Z100-R2 Other Parts Discussed in Thread: GPCCHEM , , GPCRB 你好,我使用国轩高科一款磷酸铁锂电池,单节电池电压3.2V,容量15AH,我用12节电池串联进行电量计学习;
步骤一、我首先确认了电池化学ID,单节电池化学ID487, 12节电池化学ID 448或者445;
步骤二、电量计芯片重新烧录原始固件0100_2_02-bq34z100.bqz,
步骤三、更新电量计寄存器参数,选择化学ID,然后校准电压电流温度…