Hi,
xianghe Wu 说： How should the loopback function be implemented?
This setting can be enabled using register 0x0000 bit 14.
xianghe Wu 说： There is one more thing that I designed this product without an MCU system. How should I implement register control…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您好、Andreas
我用了同样的承诺。 但这只是确定而已。 我再次开始与干净的作弊,并按照所有步骤从常见问题.
但即使这样、我也会收到以下错误
GIT_DIR=/home/ap/ti-buildroot/buildroot/dl/linux/git/.git git init .
hint: Using 'master' as the name for the initial…
The LED current can be set, and controlled dynamically, by using the IADJ pin of the TPS92512. Below equation shows how to calculate the value of the current setting resistor (RISENSE) from the ISENSE pin to ground for the desired LED current.
The IADJ…
Other Parts Discussed in Thread: TIDM-1000 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1390271/tms320f280049c-different-execution…
Other Parts Discussed in Thread: LM94 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1223233/amc6821-find-a-part-with-1-pwm-for-fan-speed-control-and-4-remote-temp-sensor-fu…
