Other Parts Discussed in Thread: TIDM-02014 , CONTROLSUITE , C2000WARE 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1255926/resolver…
TI FAE工程师
您好，我是四方集团硬件工程师 王秦。我司在TI-E2E技术论坛发贴，TI美国技术人员推荐与您联系。
我方项目概况如下，此项目希望得到贵司的技术援助
•项目名：某国产摩托车遥控装置（ODM）
•量产时间：2023年Q2
•企画台数：10K/月
功能需求：
Control Unit:
Sequence control of Base Station, typically realized by a Microcontroller.
RF Module…
As an additional question related to the previous async FIFO discussion:
In our 4T4R hopping configuration, both TX and RX multi-NCO hopping via NCOSEL pins work correctly.
But in our 2T2R configuration:
TX hopping still works
RX hopping does not work
Details…
请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 您好、Berlam：
对延迟回复深表歉意。
我看了看你的日志,看到一些有趣的事情。 因此、您要加载日志中报告的大小为392KB 的应用程序。 然后、您定制电路板报告的 CPU 负载时间(587019us)似乎比 TI EVM 报告的 CPU 负载时间(2647us)更合理。
在下面附加来自我的 TI EVM 的引导日志
DMSC Firmware Version 8.6…
OK, thank you for your reply. There is one more question. When in the UP-Down mode and EdgeMode = 3, using high-precision duty cycle control, if HRPE = 0, then both edges are simultaneously delayed backward, causing the duty cycle not to change. Its behavior…
This utility has selected a 100- or 510-class product. This utility will load the adapter 'jioserdesusbv3.dll'. The library build date was 'Oct 8 2021'. The library build time was '13:26:36'. The library package version is '9.5.0.00143…
您好
About new questions
1. When motor is spinning and for dir change, we have to decelerate to safe speed without causing kinetic energy kickback, MCT8314Z is not closed loop speed controller, we need external MCU to control the speed and then change the…
