请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 尊敬的 Fabian：
但在插入 USB 设备时、它根本没有安装。
USB 设备是否已被识别？
您是否可以尝试连接任何其他 USB 设备、并查看是否检测到该设备？
我尝试在我这边使用 Linux RT (10.01.08.01) 在 TI J7200 EVM 上测试相同的内容、并连接了 SanDisk Cruzer 刀片式 USB 器件、检测到该器件没有问题。
我还附加了以下相同的日志…
Thank you for your reply, this is very helpful to me.I did indeed detect ringing on the SCLK, by modifying the connection method, this phenomenon has been reduced. Now the data can be read and written correctly.
Additionally, I would like to clarify why…
There are some differences between your Code_register_initialization_function.txt and TI_PAGE_0_REGISTERS.xls. First and most obvious, in the xls there is just page 0. However to fully initialize the device you will need to write to some page 1 registers…
并且在用MOTOR CONTROL SDK for AM243x 9.2.0.09的时候对于定时器的配置是Timer，界面如下
但是在 MCU-PLUS-SDK-AM243X 软件开发套件 (SDK) 10.01.00.32里面对定时器的配置有两个一个是Timer，一个是GPTIMER,但是看上去更应该是GPTIMER
配置界面如下
所以对于用MOTOR CONTROL SDK for AM243x 9.2.0.09的时候，为什么没有GPTIMER，因为我现在要配置FREE_RUN模式，但是在TIMER里面没有配置的选项…
I see where the confusion is coming from. seems different device implement read/write control differently. some devices set R/W bit before the register address, and some set R/W bit after the register address. also for some more complex devices the control…
