Part Number: DRV8251 请问DRV8251的两路输入信号是否可以为恒定的01信号(或者说pwm为100或0)还是只能对于IN1和IN2输入两个互补的pwm信号,从器件手册上我无法得知该H桥电路对桥臂上管的控制是通过自举升压还是直接控制,期待回复!
May I ask if the two input signals of DRV8251 can be constant 01 signals (or pwm 100 or 0), or only two complementary pwm…
Other Parts Discussed in Thread: TIDA-010203 , TIDM-1007 , TIDM-02008 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/tools/simulation-hardware-system-design-tools-group/sim-hw-system-design/f/simulation-hardware-system…
Other Parts Discussed in Thread: MSPM0C1104 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1461293/mspm0c1104…
Part Number: UCC256404
关于UCC25640X系列解答文件所说建模论文(A Practical Analytical Small Signal Mode Applied for the LLC Converter Based on Hybrid Hysteretic Charge Control)中其中图1部分的公式推导是否正确以及如何推导得到