Part Number: DS90UB949-Q1 你好,我想知道以下问题
949(mcu通过I2C控制949)目前已经连接到948了,也能检测到948的ID了
1.我想知道如何控制948的寄存器呢?是否是通过我的MCU输入948的I2C地址控制呢?
2.我想知道设置948的对应的IO口有哪些方法呢?
3.remote模式指的是949的那个寄存器的对应位呢?
Hello, I would like to know the following questions
949(MCU controls 949…
您好
shuai feng 说： 简单点说，FBOUT1是不是直接短接到buck1 的输出。
Applies only to the Buck1 Controller if programmed for external feedback voltage adjustability ，只有buck1支持这样。所以存在您的疑虑。
Hi,
What USB2ANY hardware are you using? Are you connecting to an EVM or customer board with external USB2ANY controller?
If I recall, normal status should be green blinking.
Normally for issues like you are describing, there is no I2C communication which…
Unfortunately, the PHI was not designed for the user to use as a general controller to communicate to any device. Our software team developed a GUI and specific firmware for each GUI and device which cannot be shared with the public. And for this device…
Other Parts Discussed in Thread: TIDM-1000 , TIDM-1001 , TIDM-1007 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/1021533/tms320f280025…
Other Parts Discussed in Thread: AM62P , AM625 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1500224/am625-q1-single-channel-oldi-output-only-half-display-screen 器件型号…
