Other Parts Discussed in Thread: EVM430-FR6047 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1071336/evm430-fr6047…
Other Parts Discussed in Thread: EVM430-FR6043 , UNIFLASH 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/993941/evm430…
您好,如果是芯片损坏建议检查制成,瞬态电压是否超过18V最大额定值时。
下面几点您可以参考一下:
1.) How does the external power supply respond to a load step do you see any instability overshoot.
2.) How long are the leads from external power supply to charger, the leads will act as an inductor and…
Other Parts Discussed in Thread: EVM430-FR6047 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/807225/evm430-fr6047…
Other Parts Discussed in Thread: MSP430FR6047 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1043200/msp430fr6047…
Other Parts Discussed in Thread: MSP430F5528 , TDC1000 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/635389/ccs-tdc1000-tdc7200evm-tdc1000-tdc7200evm-low-power-mode-and-firmware…
Other Parts Discussed in Thread: TIDM-1000 请注意,本文内容源自机器翻译,可能存在语法或其它翻译错误,仅供参考。如需获取准确内容,请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/c2000-microcontrollers-group/c2000/f/c2000-microcontrollers-forum/789811/tidm-1000-current-measurement-signal…
Other Parts Discussed in Thread: EVM430-FR6047 电脑上面USS软件版本:Ultrasonic Sensing Design Center version 02_20_00_15
把EVM430-FR6047评估板通过USB连接电脑,在软件中按连接,
然后在软件左下角显示:HID Bridge Connected ---waiting for device
似乎是USB已经连上,评估板没有烧录固件,而找不到设备的意思
查看你们SLAU810A文档,可能是需要先烧录固件…