Part Number: TIDM-02013
When the control card is not inserted into the tdim-02013, the GPIO port can detect the output PWM waveform. When the control card is inserted, the voltage across C164 is measured, but no voltage PWM signal can be detected. What…
Hi Daniel,
EVM430-FR6043 had been testes individually for water flow meter, and it worked normally.
I am sure the connection of the two board is correct.
I found the below thread, the question in which is very similar to mine. Finally I changed the C51…
您好，
Vivian 说： 偶尔会显示已找到设备，但无法连接
请更换USB口试一下，电脑设备管理器上能正常识别吗？
如果仍然有问题，请参考“3 Flashing the EVM and Installing the GUI ” 尝试重新烧录一下固件 Quick Start Guide for Gas Flow Meter
您好，我们的手册中有详细的描述：
Ultrasonic Sensing Solution Design Center User Guide
slau764_EVM430-FR6043 hardware guide
slau765b_MSP430FR6043-based ultrasonic gas flow meter quick start guide (Rev. B)
slau824_Quick Start Guide for Gas Flow Meter
Other Parts Discussed in Thread: EVM430-FR6047 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/microcontrollers/msp-low-power-microcontrollers-group/msp430/f/msp-low-power-microcontroller-forum/1433444/evm430-fr6047…
