一般是用三脚架+手机夹固定，类似下面链接里这种。 The EVM needs to be mounted at a height of ~2.0-2.5m with a slight downtilt. An adjustable clamp style smartphone adapter mount for tripods and a 60-75" tripod can be used to clamp and elevate the EVM. This is only an example…
Other Parts Discussed in Thread: TLV320AIC3254 请注意，本文内容源自机器翻译，可能存在语法或其它翻译错误，仅供参考。如需获取准确内容，请参阅链接中的英语原文或自行翻译。 https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1458778/tlv320aic3254-adapting-working-evm-k-script-to-a-custom-board 器件型号： TLV320AIC32…
请看附件的wiki网站 Connecting To An LCEVM with CCS.zip
The Most Common Mistakes
If you are trying to use the on-board XDS100, be sure that there is nothing connected to the 60-pin emulation header on the board. Common issues are:
A 14-60 pin adapter left connected…
Part Number: TAS5825M
1、According to the EVM board design, the power amplifier module was integrated into the project. Without adding a heat sink, when a 4R load was connected to the AP analyzer, the chip temperature rose rapidly to 170 degrees Celsius…
Part Number: DLPC3479 Our design utilizes the CY7C65125 USB interface chip, which is powered directly by the on-board 3.3V supply. This design choice eliminates the need for an external level-shifter, allowing us to repurpose the pin that corresponds to…
In our EVMs, we are using Ethernet PHY L/A signals.
If you need ESC based control, can implement this using a system GPIO via monitoring below registers. We do not support this via PRU firmware.
